Compac Technologies India Limited
Phase 9, Mohali, Punjab
GST No. 03AABCC8483F1ZS
08048603027 72% Response Rate
Send E-mail
- Home
- »
- Product Range
- »
- Magnetic Particle Inspection Accessories
| Minimum Order Quantity | 1 Piece |
| Model | MK - YK - ADC |
| Operating Voltage | 230V AC |
| Line Current | 2.3Amps |
| Cord Length | 10 Ft |
| Leg Spacing | 0-30 cms across poles |
| Lifting Capacity | 4.5 Kg in AC, 27 Kg in DC |
| Weight | 2.5 Kg |
This articulated leg yoke operates on 220V AC and produces AC & HWDC magnetic field. Leg spacing is adjustable up to 300 mm. Lifting capacity is 4.5Kg in AC Mode & 27Kg in DC Mode.
It is used to test weld cracks as well as for on-site inspection.
| Model | MK-RFI-30-D |
| Range | +- 30 Gauss |
| Least Count | 0.1 Gauss |
| Dimensions | 100 x 75 x 25 mm |
| Weight | 100 gm |
| Conductor Material | Copper |
| Available design | Hooks type & Magnaflux Design |
We manufacture copper braided contact pads for use in magnetic particle inspection machines. There are two types of pads. Type 1 is fixed on contact plates with screws and is compatible with Magnaflux machines. The other model has the provision of hooks, through which it can be hanged on the contact plates for easy replacement. These pads can be made as per the size of contact plates in your machine
*Your information is safe with us.
| Minimum Order Quantity | 1 Number |
| Type | Test Shims |
| Thickness | 0.002" |
| Available Pattern | Circular + Cross Bar Pattern and Straight Line Pattern (Burmah Castrol Strips) |
QQI's (Quantitative Quality Indicators) are magnetic particle test pieces with artificial defects used to verify proper field direction and adequate field strength. QQI's are very thin and flexible to conform to the geometry of the test piece. They must be held in intimate contact with the test piece by either tape or glue. Meet Requirements of ASTM E1444.